Skip to Content

How to eliminate common faults in feed mill

How to eliminate common faults in feed mill

Submitted by • May 8, 2019

First check the power socket, plug, power cord for oxygen-free fall-off, breakage, if not, you can plug in the power test machine. When the motor is energized and does not rotate, you can use the light-wheel dial to rotate. One of the two starting capacitors is caused by a failure of the tolerance star. In this case, only new products are generally replaced. In another case, the power is not rotated, and an external force can be applied but the motor emits a weak current, which is caused by a slight leakage of the starting capacitor. If the current is too loud, the motor will not start at all, and it is determined that the starting capacitor is short-circuited (the motor coil is short-circuited and needs professional repair). In the absence of professional equipment, you can first remove the capacitor (4UP / 400V), plug the two leads into the zero and fire line jacks of the mains to charge the capacitor, then remove the short-circuit discharge of the two bows

Voted by:
Voted by lanpusxr

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>